Making a Phone and Smartwatch Hidden Wireless Charging Station
I made a walnut hidden wireless charging station to charge my phone and smartwatch at the same time. Check out the video above to see how I did it!
Resources:
Disclaimer: The following post contains affiliate links. If you purchase a product through one of the links, I may receive a small commission (at no cost to you) that I can use to feed the platypus. And it’s always hungry.
(most materials available at your local home improvement store)
1/4" Plywood (for making router templates)
3/4" Thick Walnut Lumber
Wireless Charger
Zero4U USB Hub (no pogo pins)
USB C Extension Cable
JST-XH 2.54mm Female Connector
USB-A Right Angle Extension Cable
USB-A to USB-C Cable
2+ Amp Wall Charger
Double Sided Tape
Superglue
Wood Glue
Disk Magnets
Satin Polyurethane Spray
Heat Shrink Tubing
Mini Screws (hold on usb hub)
Zip Ties
(in order of appearance in the video)
Dust Mask
Speed Square
Router
Router 3/8" Pattern Bit
Router Circle Cutting Jig
Bench Vise
Nylon Vise Jaw Covers
Spring Loaded Centerpunch
Portable Drill
Forstner Bits
Chisels
Miter Saw
Quick Grip Bar Clamps
Wood Glue Brush
Circle Marking Template
Table Saw
Band Saw
Rotary Tool
Drill Press
Drill Press Vise
Bench Sander
Router Table
Random Orbital Sander
Mini Screwdriver
Wire Strippers
Soldering Iron
Soldering Helping Hands Vise
Heat Gun
Hot Glue Gun
If you liked the video be sure to give it a thumbs up on YouTube and I'd love to hear any questions or thoughts about making the charging station that you might have so be sure to let me know in the comments section!
If you're not already a subscriber consider subscribing and if you want to see more projects like this one be sure to check out my other projects on this site!
Until next time, Go Billd Yourself!
Don’t miss a thing!
Subscribe to get the latest content
